How Many Feet In A Yard
CLICK HERE ===== https://bltlly.com/2tknld
Yards to feet conversion is provided here. Yard and feet are used to measure the length. Both units are used in the imperial and US customary system of measurements. One yard is equal to three feet.
If you are trying to figure out how many materials you need to order for your renovation or landscaping project, worry not. You can use our cubic feet to cubic yards calculator below. Measure the space you want to fill in feet and inches, then enter them below. Please note that materials other than rocks compact, so you may want to consider ordering 30% more than what you actually need.
A solid, unbroken slab of concrete weighs about two tons (or 4,000 pounds) per cubic yard. Breaking up concrete roughly halves the total weight per cubic yard to about one half ton (or about 2,000 pounds).
You can calculate how much concrete you need for your construction project using this calculator that works in both US Customary Units (feet and inches) and International System of Units or metric units (meters and centimeters) of measurement.
Most concrete purchases will be made in cubic yards, which equates to 27 cubic feet. For example, a project measuring 10 ft in length by 10 ft in width with a depth of 3.5 in will be just over 1 cubic yard. The equivalent to a single cubic yard in metric measurements would be roughly 0.76 cubic meters.
Ready-mixed concrete is sold by volume measured in cubic yards. If you can determine the area of your concrete project (length x width for rectangular projects) and know the thickness of the slab, you can use the information in the Concrete Volume Calculator below to determine how much concrete you need.
But job sites are not perfect, and batch plants cannot produce concrete to such exacting volumes. To allow for spillage during placement, form movement, uneven subgrade, and consolidation, most contractors order 10% to 15% more concrete than the computed volume for the forms, and round up to the nearest quarter yard. In our example 16.62 cubic yards x 105% = 17.451 cubic yards. Rounded up to the nearest quarter yard, we would request 17.5 cubic yards of concrete when ordering concrete for the project.
For irregular-shaped pavements and slabs, create a scale drawing of the project. Divide the irregular shape into a series of regular rectangles and determine the area for each rectangle in the series. Use the table above to calculate how many cubic yards of concrete would be needed for each rectangle in the series. Add the cubic yard volumes of every rectangle in the series, multiply by 105%, and round up to the nearest quarter yard.
For estimating quantity needed for irregular areas break the area up into smaller workable shapes. Measure each of them and assign them a letter. Calculate square feet for each and add the square footage together to figure total needed.
Feet are a shorter unit of measurement than yards which means that when we measure something in feet our number is always greater than if we measured it with yards. This means that to convert from yards to feet we multiply, which to convert from feet to yards we divide.
Each yard of mulch should cover approximately the same square footage, with some exceptions. What is important to remember is that the layer of mulch needs to be a few inches deep to really get the value of putting mulch down, like weed control over the total area.
The yard (symbol: yd)[3][4] is an English unit of length in both the British imperial and US customary systems of measurement equalling 3 feet or 36 inches. Since 1959 it has been by international agreement standardized as exactly 0.9144 meter. A distance of 1,760 yards is equal to 1 mile.
The standard of measure has always been taken either from some part of the human body, such as a foot, the length of the arm, the span of the hand, or from other natural objects, such as a barleycorn, or other kind of grain. But the yard was the original standard adopted by the early English sovereigns, and has been supposed to be founded upon the breadth of the chest of the Saxon race. The yard continued till the reign of Henry VII., when the ell was introduced, that being a yard and a quarter, or 45 inches. The ell was borrowed from the Paris drapers. Subsequently, however, Queen Elizabeth re-introduced the yard as the English standard of measure.[12]
It is ordained that 3 grains of barley dry and round do make an inch, 12 inches make 1 foot, 3 feet make 1 yard, 5 yards and a half make a perch, and 40 perches in length and 4 in breadth make an acre.
And be it remembered that the iron yard of our Lord the King containeth 3 feet and no more, and a foot ought to contain 12 inches by the right measure of this yard measured, to wit, the 36th part of this yard rightly measured maketh 1 inch neither more nor less and 5 yards and a half make a perch that is 16 feet and a half measured by the aforesaid yard of our Lord the King.
According to Connor,[26] cloth merchants had previously sold cloth by the yard and handful to evade high taxes on cloth (the extra handful being essentially a black-market transaction). Enforcement efforts resulted in cloth merchants switching over to the yard and inch, at which point the government gave up and made the yard and inch official. In 1552, the yard and inch for cloth measurement was again sanctioned in law (5 & 6 Edward VI Cap. 6. An Act for the true making of Woolen Cloth.)[27]
IX. Item, That every ordinary kersie mentioned in the said act shall contain in length in the water betwixt xvi. and xvii. yards, yard and inch; and being well scoured thicked, milled, dressed and fully dried, shall weigh nineteen pounds the piece at the least:...
(2) and each and every of the same Devonshire kersies or dozens, so being raw, and as it cometh forth off the weaver's loom (without racking, stretching, straining or other device to encrease the length thereof) shall contain in length between fifteen and sixteen yards by the measure of yard and inch by the rule,...
Following Royal Society investigations by John Playfair, Hyde Wollaston and John Warner in 1814 a committee of parliament proposed defining the standard yard based upon the length of a seconds pendulum. This idea was examined but not approved.[37] The Weights and Measures Act of 1824 (5 George IV. Cap. 74.) An Act for ascertaining and establishing Uniformity of Weights and Measures stipulates that:[38]
In 1834, the primary Imperial yard standard was partially destroyed in a fire known as the Burning of Parliament.[39][n 4]. In 1838, a commission[n 5] was formed to reconstruct the lost standards, including the troy pound, which had also been destroyed.[43] In 1845, a new yard standard was constructed based on two previously existing standards known as A1 and A2, both of which had been made for the Ordnance Survey, and R.S. 46, the yard of the Royal Astronomical Society. All three had been compared to the Imperial standard before the fire.
The Weights and Measures Act 1878 confirmed the status of the existing yard standard, mandated regular intercomparisons between the several yard standards, and authorized the construction of one additional Parliamentary Copy (made in 1879 and known as Parliamentary Copy VI).[47]
The yard (known as the \"international yard\" in the United States) was legally defined to be exactly 0.9144 meter in 1959 under an agreement in 1959 between Australia, Canada, New Zealand, South Africa, the United Kingdom and the United States.[51] In the UK, the provisions of the treaty were ratified by the Weights and Measures Act of 1963. The Imperial Standard Yard of 1855 was renamed the United Kingdom Primary Standard Yard and retained its official status as the national prototype yard.[52][53]
The yard is used as the standard unit of field-length measurement in American,[54] Canadian[55] and association football,[56] cricket pitch dimensions,[57] and in some countries, golf fairway measurements.
There are corresponding units of area and volume, the square yard and cubic yard respectively. These are sometimes referred to simply as \"yards\" when no ambiguity is possible, for example an American or Canadian concrete mixer may be marked with a capacity of \"9 yards\" or \"1.5 yards\", where cubic yards are obviously referred to.
The yard, subdivided into eighths, is used for the purchase of fabrics in the United States and United Kingdom[59][n 6] and was previously used elsewhere. In the United States the term \"fat quarter\" is used for a piece of fabric which is half a yard in length cut from a roll and then cut again along the width so that it is only half the width of the roll, thus the same area as a piece of one quarter yard cut from the full width of the roll; these pieces are popular for patchwork and quilting.[61] The term \"fat eighth\" is also used, for a piece of one quarter yard from half the roll width, the same area as one eighth cut from the roll.[62]
For purposes of measuring cloth, the early yard was divided by the binary method into two, four, eight and sixteen parts.[63] The two most common divisions were the fourth and sixteenth parts. The quarter of a yard (9 inches) was known as the \"quarter\" without further qualification, while the sixteenth of a yard (2.25 inches) was called a nail.[64] The eighth of a yard (4.5 inches) was sometimes called a finger,[65] but was more commonly referred to simply as an eighth of a yard, while the half-yard (18 inches) was called \"half a yard\".[66]
First, measure the area in feet. To convert inches to feet, divide the number of inches by 12. Measure the length, width and height (or depth) of your debris. Use a tape measure for this purpose. For larger areas, a measuring wheel may be useful.
Next, multiply the length, width and height measurements. Divide this number by 27. This will give you the volume in cubic yards. For how to calculate cubic yards using the graphic above as an example, the steps would be:
You can also easily calculate cubic yardage by converting all three dimensions of your material into yards and multiplying them. For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt. This is how it breaks down: 59ce067264