Yaesu Ft-897 Control Software

Yaesu Ft-897 Control Software === https://tiurll.com/2tcHPD

Yaesu Control Server 1.17 (Mac OS X)Control server to remote operate Yaesu FT-897, CAT III, Yaesu FT-857A, Yaesu FT-872M transceivers.Control server allows you to operate up to 8 handheld units from one computer. Control up to 8 Yaesu RADIOs successfully. Control your radios even when your computer is not powered on. Push button or voice control, either way your radio will be controlled.

Yaesu W-3100 First wireless control software for Yaesu FT-897 radio. You can select any frequency from 900 Mhz to 3000 Mhz at 40/50/1/2/1.5 Mhz steps as well as any digital mode. You can demodulate the signal and see the waveform. You can select the AGC of your radio for any channel and adjust from -7 to 7. You can select the standard power of the radio and the antenna selection. The user can make a dial up seven choices to perform the radio operations. You can select the receive and transmit ranges for the radio. The user can select the output condition of the signal strength and status. The user can select from the 20 various signal strength levels. You can change the mode between CW and Voice through voice recognition. As the user touches the button on the radio the radio will return automatically to the detected frequency it last set. d2c66b5586